Let’s Begin!
Are you ready? Let’s get started. The best part of this trick is that it definitely does not pollute the environment. So don’t be afraid of splashes on your clothes. Let’s start now:
Step 1: Lift the toilet lid and leave it there
Step 2: Wrap the cling film around the toilet bowl and create an airtight layer
Step 3: Try pushing the cling film so that the air trapped under the coated area presses on the water
(Hint) Make sure the seat is clean and dry enough to hold the nylon. So the seal will be better.
Do you see the stretch film bulging due to internal pressure? So you are doing it right. See the next page for the last two steps.
Step 4: Gently press where the stretch band is inflated. This will remove the blockage by squeezing out the water at the bottom. Repeat this process several times. Gradually, you will notice some dirt appearing in the toilet bowl. This is a good sign.
Step 5: After pressing several times, remove the sticky film and remove dirt from the toilet with gloves!
Now the toilet bowl is ready for use again. All the dirt that could clog the toilet got out! With success!
